Toyota 2GR-FE Manual page 664

ES–498
2GR-FE ENGINE CONTROL SYSTEM – CRANKSHAFT POSITION SENSOR
ES
INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring of the
crankshaft position sensor.
(b) Install the crankshaft position sensor with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
(c) Connect the crankshaft position sensor connector.
2. INSTALL COOLER COMPRESSOR ASSEMBLY
HINT:
(See page AC-225)
3. INSTALL GENERATOR ASSEMBLY
HINT:
(See page
A106634E02
CH-22 )