Toyota 2GR-FE Manual page 789

CO–24
CO
2GR-FE COOLING – RADIATOR
REMOVAL
1. REMOVE FRONT WHEEL OPENING EXTENSION
PAD RH
2. REMOVE FRONT WHEEL OPENING EXTENSION
PAD LH
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE ENGINE UNDER COVER LH
5. DRAIN ENGINE COOLANT (See page CO-5)
6. REMOVE V-BANK COVER SUB-ASSEMBLY (See
page EM-23)
7. REMOVE COOL AIR INTAKE DUCT SEAL (See page
EM-23)
8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See
page ES-503)
9. REMOVE AIR CLEANER INLET SUB-ASSEMBLY
(See page EM-24)
10. REMOVE NO. 1 AIR CLEANER INLET (See page
24)
11. REMOVE FRONT BUMPER ASSEMBLY (w/ Fog
Light) (See page ET-6)
12. REMOVE FRONT BUMPER ASSEMBLY (w/o Fog
Light) (See page ET-6)
13. REMOVE FRONT BUMPER ENERGY ABSORBER
(See page ET-9)
14. SEPARATE RADIATOR RESERVE TANK HOSE
(a) Separate the radiator reserve tank hose from the
radiator assembly.
A133362
15. DISCONNECT RADIATOR HOSE INLET
(a) Separate the radiator inlet hose from the radiator
assembly.
A133363
EM-