Toyota 2GR-FE Manual page 741

FU–28
FU
Tape
(*2)
2GR-FE FUEL – FUEL PUMP
8. REMOVE FUEL TANK VENT TUBE SET PLATE
(a) Remove the 8 bolts and set plate.
A129480
9. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH
PUMP AND GAUGE
(a) Pull out the fuel suction tube from the fuel tank.
(b) Remove the gasket from the fuel suction tube.
A129481
DISASSEMBLY
1. REMOVE NO. 2 FUEL SUCTION SUPPORT
(a) Using a screwdriver with its tip wrapped with tape,
A077832E05
2. REMOVE FUEL PUMP CUSHION RUBBER
(a) Remove the fuel pump cushion rubber from the fuel
A079492E01
3. REMOVE FUEL SENDER GAUGE ASSEMBLY
(*1)
(a) Disconnect the fuel sender gauge connector (
Slide
(b) Unlock the fuel sender gauge, and slide it to remove
A129482E02
NOTICE:
• Do not damage the fuel pump filter.
• Be careful that the arm of the sender gauge
does not bend.
disengage the 5 snap claws from the claw holes,
and remove the No. 2 fuel suction support.
NOTICE:
Do not damage the fuel suction support.
pump.
*
( 2).
*
1).