Table of Contents
Advertisement
E-Mail
9. If required, select Cc from the To: dropdown menu to copy a recipient on the e-mail. Use the
touch screen keyboard to enter the recipient details and then select the Add button.
Note:
At least one To address must be selected, documents cannot be sent to a Cc address
alone.
10. Select the Close button to save the information you entered.
11. If required, select the From... button and use the touch screen keyboard to enter or edit the
From address for the e-mail.
Note:
Your System Administrator may choose to lock the From button to prevent the preset
From address being altered.
•
Select the OK button.
12. If required, select the Subject... button and use the touch screen keyboard to enter or edit the
subject title for the e-mail.
•
Select the OK button.
13. If required, select the File Name button and use the touch screen keyboard to enter a name
for the file created from your scanned document. If you choose not to enter a file name a
default name entered by your System Administrator will be used.
•
Select the OK button.
14. Select the Layout Adjustment tab.
15. Select the Edge Erase button.
16. Select the Edge Erase option required.
•
All Edges erases an equal amount from all the edges. Use the arrow buttons to adjust the
amount to be erased from 3 mm (0.1") to 50 mm (2.0") or select the entry field and use the
numeric keypad to enter the amount required.
•
Individual Edges enables a different amount to be erased from each of the edges, on
both the first and second sides. Use the arrow buttons to adjust the amount to be erased
from 3mm (0.1") to 50mm (2.0") or select the appropriate entry field and use the numeric
keypad to enter the amount required.
17. Select the OK button.
18. Press the Start button on the control panel to scan the original.
19. Remove the original from the document feeder or document glass when scanning has
completed. The job enters the job list ready for processing.
20. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
More Information
Using a User ID to Log In at the Device
Using Internet Services to find System Administrator Contact Details
System Administrator Guide www.xerox.com/support.
Removing Blank Pages from E-mail Originals During Scanning
Use the E-mail feature to scan images and send them to a recipient as an attachment to an e-mail.
Note:
This option must be made available by your System Administrator.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the E-mail features.
544
®
WorkCentre
XXXX
User Guide
Advertisement
Table of Contents
Troubleshooting
