Table of Contents
Advertisement
Print
11. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the Release button.
12. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the Mac Print Driver
Choosing a Finishing Option when using the Mac Print Driver
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Logging into a Print Driver using Xerox Standard Accounting or Network Accounting
Choosing an Output Destination when using the Mac Print Driver
You can print to the device from your computer through a print driver. The Xerox Mac print driver
allows you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Use the Output Destination options to specify a destination for your output. The destinations
depend on the type of finisher attached to your device.
Note:
If a destination is listed, but is shown in gray text, it may not be available due to a finishing
option that you have selected.
Note:
This option must be made available by your System Administrator.
1. Open the document to be printed. From most applications select File, then select Print from
the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Select the Xerox driver from the list of print drivers available.
4. Select Xerox Features from the print driver properties menu - the name of the menu will vary
depending on the application you are printing from. From most applications select the
dropdown menu that states Copies and Pages, or that states the application name.
5. Select Paper / Output from the Xerox Features group selection menu. This is usually the active
area when the print driver opens.
6. Select the Output Destination option required.
•
Automatically Select sends the job to an output tray based on the paper size.
•
Top Tray sends the job to the output tray at the top of the device.
•
Stacker Tray the document will print to the stacker tray at the side of the device.
•
Booklet Maker Tray sends the job to the output tray on the right side of the device.
7. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
User Guide
®
WorkCentre
XXXX
485
Advertisement
Table of Contents
Troubleshooting
