Xerox WorkCentre series User Manual page 336

Print
4. Open the print driver Properties window - the method will vary depending on the application
you are printing from. From most Microsoft applications select the Properties or Preferences
button to open the window.
5. Click the Document Options tab.
6. Select the Special Pages tab.
7. Click the Add Exceptions button.
Note: If the Add Exceptions button is greyed out it is because you have selected a finishing
option that is incompatible with inserts or your job only has 1 page.
8. Click the Pages entry box and use your keyboard to enter the pages in your source document
that are exceptions.
9. Select the Paper option(s) required. You can select a specific paper size, color and type. You can
also specify that the inserts should be printed using the existing job settings.
10. Select the 2-Sided Printing option required.
• Use Job Setting uses any programming already entered for the job.
• 1-Sided Print prints on 1 side of the paper or transparency. Use this option when printing
on transparencies, envelopes or labels.
• 2-Sided Print prints on both sides of a sheet of paper. The images are printed so the job
can be bound on the long edge of the sheet.
2-Sided Print, Flip on Short Edge prints on both sides of a sheet of paper. The images are
•
printed so the job can be bound on the short edge of the sheet.
11. Click the OK button.
12. Click the OK button to save your settings.
13. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
14. Collect your job from the device.
15. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
16. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the Release button.
17. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the PCL Print Driver
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Logging into a Print Driver using Xerox Standard Accounting or Network Accounting
Designing and Applying a Watermark to Prints using the PCL Print Driver
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
336
®
WorkCentre XXXX
User Guide