Scan - Xerox WorkCentre series User Manual

Internet Services
More Information
Using Internet Services to find System Administrator Contact Details
Viewing Active Jobs using the Job Status Menu
Viewing the Progress and Details of a Job using the Job Status Menu
Printing the Information Pages from the Machine Status Menu

Scan

Templates
Creating a New Template in Internet Services
Internet Services uses the embedded web server on the device. This allows you to communicate
with the device over the internet or intranet through your web browser.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access this feature.
Templates and mailboxes cannot be created using the device user interface, they must be created
or modified using the Scan page within Internet Services.
Note: This option must be made available by your System Administrator.
Use the Templates feature when you want to scan or fax jobs using the Workflow Scanning service
on your device. Templates contain information to tell the device where to file a scanned document.
They also contain settings, such as image quality and file format. Templates help you scan images
more quickly because the template contains all the pre-programmed settings for your scan. If
necessary, you can change the settings at the device.
All the templates available are displayed on the device in the Workflow Scanning template list.
To create a template you will need to know some technical information about your network. If you
are not technically-minded, you will find it easier to copy an existing template and then modify it
rather than create a new one. If possible, ask your System Administrator to create a new template
for you.
Note: Your System Administrator must configure a scan destination (known as a file repository)
before you can create a template or add a destination to a template.
Refer to the System Administrator Guide for further information.
1. At your computer, open your web browser.
2. In the URL field, use your keyboard to enter http:// followed by the IP Address of the device. For
example: If the IP Address is 192.168.100.100, enter http://192.168.100.100.
Note: To find out the IP Address of your device, print a configuration report or ask your System
Administrator.
3. Press the Enter button on your keyboard to load the page.
4. Click the Scan tab.
5. If required, select Templates from the Display menu in the top left hand corner. If your System
Administrator has not set up any Mailboxes you will not see the Display menu and will be sent
directly to the Templates page.
6. Select the Create New Template link from the Template Operations menu.
604
®
WorkCentre XXXX
User Guide