Table of Contents
Advertisement
ID Card Copy
Making Copies of ID Cards
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the ID Card Copy features.
ID Card Copy enables you to scan each side of an ID card onto one side of a single sheet of paper.
The ID card is placed on the document glass and the first side is scanned. When prompted, the card
is turned over and the other side is scanned. You can also set different image quality settings for
side 1 and side 2.
Note:
This option must be made available by your System Administrator.
1. Lift up the document feeder. Place the ID Card face down onto the document glass and register
it to the arrow at the top left rear corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Press the Services Home button.
4. Select the ID Card Copy button on the touch screen.
5. Select any options required.
6. Enter the number of prints required using the numeric keypad on the control panel.
7. Press Start to scan the ID Card.
8. Turn over the ID Card on the document glass when scanning has completed.
9. Select any options required.
10. Press Start to scan the ID Card.
11. Remove the ID Card from the document glass when scanning has completed.
12. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
More Information
Using a User ID to Log In at the Device
Copy Options
Reduce or Enlarge
Reducing or Enlarging Copies of ID Cards
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the ID Card Copy features.
User Guide
8
555
Advertisement
Table of Contents
Troubleshooting
