Power On And Off; Powering The Device On; Powering The Device Off - Xerox WorkCentre series User Manual

Hide thumbs Also See for WorkCentre series:

Table of Contents

Getting Started

Power On and Off

1. Ensure that your device is connected to a suitable power supply and that the power cord is fully

plugged in to the electrical outlet of the device.

2. Press the Power button. The entire powering on process (to power on all installed options) takes

less than 3 minutes 50 seconds.

If there are any pages in the document feeder input tray when the device powers on or

exits power save mode you will be prompted to reload the documents.

Power Off ends the current session and turns off the device.

1. Press the Power button on the control panel.

2. Select the Power Off button on the touch screen.

3. Select the Power Off button again to confirm that the device should power off.

Confirming power off will result in the deletion of any jobs currently in the queue. If

Cancel is selected the power off option will be cancelled, the device will be available for use and

any jobs currently in the queue will be retained.

The device will begin a controlled power down sequence. It remains on for approximately 36

seconds before switching off.