Locating The Serial Number For Your Device - Xerox WorkCentre series User Manual

Getting Started
5. Paper Tray 3: This tray is standard on all models. The tray can be used for media size A4 LEF
(8.5 x 11" LEF).
6. Paper Tray 4: This tray is optional on all models. The tray can be used for media size A4 LEF
(8.5 x 11" LEF).
7. Bypass Tray: Used for non-standard printing media from A6 SEF (2.8 x 4.3" SEF) to A3 (11 x
17").
8. Offset Catch Tray: The optional offset catch tray delivers output collated or uncollated. Each
set or stack will be offset from the previous to enable easy separation.
9. Office Finisher: This optional device stacks, collates, staples and offsets your output. Hole
punch kits can be installed with this finisher.
10. New Office Finisher Booklet Maker: This optional finisher creates booklets, collates, offsets,
stacks and staples your output. Hole punch kits can be installed with this finisher.
11. Convenience Shelf: An optional shelf used for holding documents or the Convenience Stapler.
12. Convenience Stapler: Optional stapler used to staple sheets if there is no finisher, or to re-
staple originals after copying.
Note: SEF is Short Edge Feed (where the short edge of the paper is the leading edge when the
paper is fed into the device). LEF is Long Edge Feed (where the paper is oriented so that the long
edge is fed into the device first).
Locating the Serial Number for Your
Device
If you need assistance during or after product installation, please visit
solutions and support.
If you require further assistance, call our experts at the Xerox Support Center, or contact your local
representative. When telephoning please quote the machine serial number.
The Xerox Support Center or local representative telephone number is provided when the device is
installed.
30
®
WorkCentre XXXX
www.xerox.com for online
User Guide