Table of Contents
Advertisement
Administration and Accounting
Before you begin
You will need information from your Xerox Representative.
•
The PIN.
•
Information on which option to select from the Impression Mode menu.
Refer to the System Administrator Guide for further information.
Obtaining your PIN
1. Press the Machine Status button on the Control Panel.
2. Select the Tools tab on the touch screen.
3. Select the Device Settings button.
4. Select the General button.
5. Select the Billing Impression Mode button.
6. Note the Sequence and Serial Number shown on the screen. You will need to provide this
information to your Xerox Representative before they can give you a PIN to change the billing
impression mode.
Changing the billing impression mode
1. Press the Machine Status button on the Control Panel.
2. Select the Tools tab on the touch screen.
3. Select the Device Settings button.
4. Select the General button.
5. Select the Billing Impression Mode button.
6. Select the Impression Mode... button.
7. Use the touch screen keyboard to enter your PIN number.
8. Select the OK button.
9. Select the option your Xerox Representative advised you to select from the Impression Mode
menu.
10. Select the Close button.
More Information
Viewing Billing Information using the Machine Status Menu
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details
Changing the Billing Impression Mode in Internet Services
Installing Optional Services using the Tools Menu
You can use the Tools menu to adjust the brightness of the Control Panel display, change the billing
impression mode, or enable an optional feature on your device.
Use the Feature Installation screen to install optional services on your device, for example the XPS
(XML Paper Specification) feature, which enables the device to print XML Paper Specification files.
User Guide
®
WorkCentre
XXXX
671
Advertisement
Table of Contents
Troubleshooting
