Table of Contents
Advertisement
Scan
Filing Options
Setting a File Format for Workflow Scans
Workflow Scanning converts hard copy documents into electronic images and saves them into
network filing destinations (repositories).
A Template must be used when a scan is made - the template contains the filing destination
address and other scan settings such as the image quality. When making a scan you can edit the
scan settings but not the filing destination.
Note:
This option must be made available by your System Administrator.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Workflow Scanning features.
Use the Filing Options to specify details about the scanned images to be stored, such as the file
format, whether the document is stored as a single file per page or as a multi-page document, or
whether the scanned document should be searchable.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Press the Services Home button.
4. Select the Workflow Scanning button on the touch screen.
Note:
If your System Administrator has added mandatory fields to the default template you
will be asked to complete the required document information as soon as you select the
Workflow Scanning button.
5. If required, select the Workflow Scanning tab. This is usually the active tab when the Workflow
Scanning service opens.
6. Select a template type from the All Templates dropdown menu.
7. If required, ensure the latest templates are available by selecting Update Templates from the
Advanced Settings tab.
8. Select the template required.
9. Select the Filing Options tab.
10. Select the File Format button.
11. Select the Image Only search setting required.
•
Image Only produces images that are not searchable.
•
Searchable results in searchable text. If required, use the drop-down menu to change the
language your document is written in.
12. Select the type of file required.
PDF (Portable Document Format) produces a single file, or an individual file per page.The
•
output is not searchable. Depending on the receiving device, the PDF selection may not be
compatible when the resolution is set to 200 dpi. This option is best used for sharing and
printing documents.
User Guide
®
WorkCentre
XXXX
251
Advertisement
Table of Contents
Troubleshooting
