Table of Contents
Advertisement
Print
6. Select the 2-Sided Printing option required.
•
1-Sided Print prints on 1 side of the paper or transparency. Use this option when printing
on transparencies, envelopes or labels.
2-Sided Print prints on both sides of a sheet of paper. The images are printed so the job
•
can be bound on the long edge of the sheet.
•
2-Sided Print, Flip on Short Edge prints on both sides of a sheet of paper. The images are
printed so the job can be bound on the short edge of the sheet.
7. Click the OK button to save your settings.
8. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
9. Collect your job from the device.
10. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
11. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the Release button.
12. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the XPS Print Driver
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Logging into a Print Driver using Xerox Standard Accounting or Network Accounting
Finishing
Choosing a Finishing Option when using the XPS Print Driver
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Note:
To print an XPS document, your device needs to have the optional XPS feature installed.
Depending on the optional finishing device and kits installed you will have the choice of different
output options such as stapling, folding and collating.
Note:
This option must be made available by your System Administrator.
The options available from your print driver depend on how your System Administrator has
configured the print driver on your computer.
Use the No Finishing option if no finishing is required for the output.
422
®
WorkCentre
XXXX
User Guide
Advertisement
Table of Contents
Troubleshooting
