Bearing Inner Race (4Th Gear End); Preinspection - Mazda 1990 323 Workshop Manual Supplement

J3
TRANSAXLE AND TRANSFER UNIT
Preinspection
1. Measure the clearance between the 4th gear and bearing
inner race.
Clearance: 0.165-0.365mm (0.0064-0.0144 in)
Maximum : 0.415mm (0.0163 in)
-"
03UOJ3-064
R
2. Measure the clearance between the 3rd gear and 2nd gear.
Clearance: 0.05-0.20mm (0.002-0.008 in)
Maximum : 0.25mm (0.010 in)
_ .
03UOJ3-06
03UOJ3-061
03UOJ2-04
I 1
03UOJ2-045
J3-34
Disassembly note
Bearing inner race (4th gear end)
Caution
l
Hold the shaft with one hand so that it does not fail.
1. Remove the bearing inner race with the SST.
._,'
Clutch hub assembly (3rd/4th), synchronizer ring (3rd)
and 3rd gear
1. Remove the retaining ring.
Caution
l
Hold the shaft with one hand so that it does not fail.
2. Remove the clutch hub assembly (3rd/4th) synchronizer ring
(3rd) and 3rd gear with the SST.
Bearing inner race (Primary shaft end)
1. Remove the bearing inner race with the SST.