Table of Contents
Advertisement
Parameters
size
Guidelines
Operations greater than 8192 bytes should only be used with TCP as the
transport-layer protocol.
Related Commands
rsize, transport
Examples
v Enters NFS Dynamic Mounts configuration mode. Sets the mount time out to 1
502
Command Reference
Specifies the number of bytes in each NFS write transaction. Use an integer
in the range of 1024 through 32769. The default is 4096.
minute. Sets the mount inactivity timer to 3 minutes. Sets the read and write
request sizes to 8192 bytes. Sets the maximum number of RPC time outs per
NFS transaction to 4. Sets the initial retransmission interval to 0.5 seconds.
Default values are retained for the transport-layer protocol (TCP), the NFS
version (3), and the mount type (read-write).
# nfs-dynamic-mounts
Modify NFS Dynamic Mounts configuration
# mount-timeout 60
# inactivity-timeout 180
# rsize 8192
# wsize 8192
# retrans 4
# timeo 5
# exit
#
Advertisement
Table of Contents
