forbid-external-references (deprecated)
Comments
This command has been deprecated. Use the external-references command in its
place.
front-attachment-format
Specifies the attachment format received from front end clients.
Syntax
front-attachment-format {dime | dynamic | mime | detect}
Parameters
dime
dynamic
mime Specifies that client attachments are MIME-encapsulated documents.
detect Specifies that client attachments are deduced from message data.
Related Commands
back-attachment-format
Examples
v Specifies that front end attachments are DIME-encapsulated.
front-persistent-timeout
Sets the inter-transaction timeout between the completion of a TCP transaction and
the initiation of a new one on the gateway-to-client connection.
Syntax
front-persistent-timeout timerValue
Parameters
timerValue
Guidelines
The front-persistent-timeout command sets the value of the inter-transaction
timeout. This value is the maximum idle time to allow between the completion of
a TCP transaction and the initiation of a new TCP transaction on the
gateway-to-client connection. If the specified idle timeout is exceeded, the
connection is torn down.
442
Command Reference
Specifies that client attachments are DIME-encapsulated documents.
Specifies that client attachments are deduced from document content.
# front-attachment-format dime
#
Specifies the maximum inter-transaction idle time in seconds. Use an
integer in the range of 0 to 7200. The default is 180. A value of 0 disables
persistent connections.