Table of Contents
Advertisement
Chapter 91. Web Application Error Handling Policy
configuration mode
This chapter provides an alphabetic listing of commands that are available in Web
Application Error Handling Policy configuration mode.
To enter this mode, use the Global webapp-error-handling command. The global
command creates the Error Handling Policy if the Policy does not exist. While in
this mode, define the parameters for the Error Handling Policy object.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are available in Error Handling Policy configuration
mode.
error-monitor
Assigns or removes a Count Monitor.
Syntax
error-monitor name
no error-monitor
Parameters
name
Guidelines
The Count Monitor can monitor transactions that are handled by this Error
Handling Policy. The Count Monitor must be configured to count transactions that
are generated by this Error Handling Policy (typically, the Count Monitor is
configured to capture all events).
Use the Global monitor-count command to create a Count Monitor.
Related Commands
monitor-count
error-rule
Assigns or removes a Processing Rule.
Syntax
error-rule name
Parameters
name
© Copyright IBM Corp. 1999, 2008
Specifies the name of an existing Count Monitor.
Specifies the name of an existing Processing Rule.
741
Advertisement
Table of Contents
