Table of Contents
Advertisement
DUPLICATE
PENDING
Related Commands
show stylesheet, xsl cache size
show system
Displays values for the SNMP system group in addition to a appliance-specific
serial number.
Syntax
show system
Related Commands
contact, location, name, show snmp
show tcp
Displays a list of current TCP connections.
Syntax
show tcp
show throttle
Displays the throttle settings that specify the behavior of the DataPower appliance
when faced with a user-defined low memory condition.
Syntax
show throttle
Guidelines
The appliance monitors its memory usage and reacts to low memory conditions by
first refusing to accept new connections. If the refusal to accept new connections
does not free sufficient memory, the appliance responds by restarting itself.
When free memory falls below the throttle threshold (a measure of free memory
expressed as a percentage of total memory), the appliance refuses to accept new
connections. If the amount of free memory does not rise above the throttle
threshold in the specified timeout (expressed in seconds), the appliance restarts. If
free memory falls below the kill threshold (also a measure of free memory expressed
as a percentage of total memory), the appliance restarts immediately
Related Commands
throttle
within the style sheet, or a corrupted document, possibly caused by
transient network conditions at the time the style sheet was accessed)
Usually indicates a temporary style sheet that was generated during a
pipeline transformation
Indicates that the style sheet is being retrieved or undergoing compilation
Chapter 114. Monitoring commands
969
Advertisement
Table of Contents
