Table of Contents
Advertisement
ldap-version
Specifies the LDAP version.
Syntax
ldap-version {v2 | v3}
Parameters
v2
v3
Guidelines
The ldap-version command specifies the LDAP version for LDAP authentication.
This command is relevant only when the authentication method is ldap, as defined
with the au-method command.
Related Commands
au-method
Examples
v Sets the LDAP version to v3.
loadbalancer-group
Assigns a load balancer group for LDAP authentication.
Syntax
loadbalancer-group name
Parameters
name
Guidelines
The loadbalancer-group command assigns a load balancer group for LDAP
authentication. When the authentication method is ldap, as defined with the
au-method command, you need to define the LDAP server in one of the following
ways:
v The au-server-host and au-server-port commands
v The loadbalancer-group command
To create a new load balancer group, use the Global loadbalancer command.
Related Commands
au-method, au-server-host, au-server-port, loadbalancer (Global), show
loadbalancer-status
(Default) Uses LDAP version 2.
Uses LDAP version 3.
# ldap-version v3
#
Specifics the name of an existing load balancer group.
Chapter 64. RBM Settings configuration mode
595
Advertisement
Table of Contents
