Wsrm-Source-Response-Create-Sequence; Wsrm-Source-Retransmission-Interval - IBM WebSphere XS40 Command Reference Manual

Datapower xml security gateway
Table of Contents

Advertisement

to sent to the server and when there is no Reliable Messaging source that was
created by a MakeOffer from the server. The Reliable Messaging source is created
by sending a CreateSequence SOAP request to the server address.
Related Commands
wsrm, wsrm-source-exponential-backoff, wsrm-source-inactivity-close-interval,
wsrm-source-make-offer, wsrm-source-maximum-queue-length,
wsrm-source-request-ack-count, wsrm-source-retransmission-interval,
wsrm-source-retransmit-count

wsrm-source-response-create-sequence

Indicates whether to create a source from the front side to the client.
Syntax
wsrm-source-response-create-sequence {on | off}
Parameters
on
off
Guidelines
When the WS-Addressing mode as defined by the wsa-mode command is
wsa2sync or wsa2wsa, the wsrm-source-response-create-sequence command
indicates whether to create a Reliable Messaging source from the front side to the
client when there is SOAP data to send to the client and there is no Reliable
Messaging source that was created by a MakeOffer from the client by sending a
CreateSequence SOAP request to the WS-Addressing ReplyTo address.
Related Commands
wsa-mode, wsrm, wsrm-source-exponential-backoff, wsrm-source-inactivity-close-
interval, wsrm-source-maximum-queue-length, wsrm-source-request-ack-count,
wsrm-source-retransmission-interval, wsrm-source-retransmit-count

wsrm-source-retransmission-interval

Specifies the duration that a source waits.
Syntax
wsrm-source-retransmission-interval interval
Parameters
interval
Guidelines
The wsrm-source-retransmission-interval command specifies the duration in
milliseconds that a Reliable Messaging source waits for an Ack before
retransmitting the message. This property also applies to the retransmission of the
CreateSequence SOAP message.
846
Command Reference
Creates a Reliable Messaging source.
(Default) Does not create a Reliable Messaging source.
Specifies the duration in milliseconds. Use an integer in the range of 10
through 60000. The default is 2000.

Advertisement

Table of Contents
loading

Table of Contents