Restrict-Admin - IBM WebSphere XS40 Command Reference Manual

Datapower xml security gateway
Table of Contents

Advertisement

Syntax
pwd-username {on | off}
Parameters
on
off
Guidelines
When enabled, the password BobPassword or password4Bob is acceptable for user
name Bob.
When disabled, the password BobPassword or password4Bob is not acceptable for
user name Bob.
Related Commands
pwd-digit, pwd-minimum-length, pwd-mixed-case, pwd-nonalphanumeric
Examples
v Allows passwords to contain the user name.
v Restores the default state.

restrict-admin

Specifies whether to restrict access by the admin account to the command line on
the serial port.
Syntax
restrict-admin {on | off}
Parameters
on
off
Guidelines
The restrict-admin command specifies whether to restrict access by the admin
account to the command line on the serial port.
v When enabled, the access method for the admin account is through the command
v When disabled, the default state, the admin account can use all of the available
Examples
v Restrict command line access by the admin account to the serial port.
Indicates that passwords can contain the user name.
(Default) Indicates that passwords cannot contain the user name.
# pwd-username on
#
# pwd-username off
#
Restricts the admin account to command line access on the serial port.
(Default) Allows the admin account to all access methods.
line when connected to the serial port.
access methods.
# restrict-admin on
#
Chapter 64. RBM Settings configuration mode
611

Advertisement

Table of Contents
loading

Table of Contents