Table of Contents
Advertisement
Parameters
namespace
Guidelines
The default namespace for parameters introduced with the CLI or WebGUI is:
Related Commands
parameter, query-param-namespace
Examples
v Assigns a default namespace for parameters made available to the current XSL
ip-address
Specifies the local IP address to monitor for incoming traffic.
Syntax
ip-address {address | 0}
Parameters
address Specifies the IP address (primary or secondary) of a DataPower Ethernet
0
Guidelines
In conjunction with the port command, identifies the IP addresses and ports that
the XSL Proxy service monitors.
Related Commands
port
Examples
v Specifies 10.10.13.35:23000 as the local IP address-port that the current XSL
monitor-count
Assigns a message-count monitor to an XSL Proxy.
934
Command Reference
Specifies the name of the default namespace.
http://www.datapower.com/param/config
Proxy via the command line or WebGUI.
# default-param-namespace
http://www.somecompany.com/namespaces/
#
interface.
Indicates all DataPower Ethernet interfaces.
Proxy service monitor.
# xslproxy proxy-1
XSL Proxy Service configuration mode
# ip-address 10.10.13.35
# port 23000
#
Advertisement
Table of Contents
