Table of Contents
Advertisement
Parameters
on
off
Examples
v Causes the DataPower appliance to close front and back TCP connections if the
v Restores the default state.
local-address
Specifies the local interface to monitor for client requests.
Syntax
local-address {address | 0}
Parameters
address Binds the Stateful Raw XML Handler to a single, specific interface-port
0
Guidelines
This command only sets the IP address for the Stateful Raw XML Handler. Use the
port command to set the TCP port on which the Stateful Raw XML Handler
listens.
Related Commands
port, remote-address, remote-port
Examples
v Binds the current Stateful Raw XML Handler to the specified IP address.
v Binds the current Stateful Raw XML Handler to all enabled interfaces. This
646
Command Reference
Abandons the session in the event of a fault condition.
(Default) Maintains the session in the event of a fault.
appliance generates a fault.
# close-on-fault on
#
or
# no close-on-fault
#
# close-on-fault off
#
or
# close-on-fault
#
pair.
Binds the Stateful Raw XML Handler to the specified port on all enabled
interfaces.
# local-address 192.168.1.10
#
configuration is strongly discouraged for production environments.
# local-address 0
#
Advertisement
Table of Contents
