Table of Contents
Advertisement
Syntax
trap-code code
no trap-code code
Parameters
code
Guidelines
The trap-code command specifies individual event codes to add to the trap list.
Invoke this command for each event to add to the list.
Use the no trap-code command to delete a previously configured code from the
trap list.
Examples
v Adds the "Out of memory" parser event (hexadecimal code 0x00030002) to the
trap-priority
Specifies the minimum priority for trap events.
Syntax
trap-priority priority
Parameters
priority
Guidelines
The trap-priority command specifies the minimum priority for trap events. The
priorities are hierarchical (in descending order of criticality) as emergency, alert,
critic, error, warn, notice, info, and debug.
Examples
v Sets trap priority to warn or greater criticality.
trap-target
Specifies the recipient of SNMP traps issued by the local SNMP agent or engine.
Syntax
trap-target address port community
no trap-target address port
Specifies the hexadecimal identifier of an event code.
list.
# trap-code 0x00030002
#
Identifies the event priority. The default is error.
# trap-priority warn
#
Chapter 72. SNMP Settings configuration mode
639
Advertisement
Table of Contents
