Table of Contents
Advertisement
Related Commands
use-ldap-ssl
ssl-key
Specifies the location of the TAM SSL key file.
Syntax
ssl-key name
Parameters
name
ssl-key-stash
Specifies the location of the TAM SSL key password stash file.
Syntax
ssl-key name
Parameters
name
use-fips
Determines whether to enable FIPS mode.
Syntax
use-fips {yes | no}
Parameters
yes
no
Guidelines
The use-fips command determines whether to enable Federal Information
Processing Standard (FIPS) mode for secure communication between the
DataPower appliance (the TAM client) and the TAM authorization server.
In the following situations, the TAM client will be down after configuration,
because the TAM client cannot establish a secure connection with the TAM server:
v If the TAM server requires TLS and the TAM client uses SSL.
v If the TAM server requires SSL and the TAM client uses TLS.
use-ldap-ssl
Indicates whether the connection to the LDAP server uses SSL.
Specifies the name of the TAM SSL key file.
Specifies the name of the TAM SSL key password stash file.
Uses TLS version 1 as the secure communication protocol.
(Default) Uses SSL version 3 as the secure communication protocol.
Chapter 77. TAM configuration mode
659
Advertisement
Table of Contents
