Table of Contents
Advertisement
You can also control routing behavior, interface isolation and ECN settings.
Use the cancel or exit command to leave Network Settings configuration mode
and enter Global configuration mode.
Use the no network command to reset network settings to their defaults.
Related Commands
cancel, exit
nfs-client
Enters NFS Client Settings configuration mode.
Syntax
nfs-client
no nfs-client
Guidelines
While in NFS Client configuration mode, you configure NFS client global settings,
which are employed in all application domains. By default, the NFS Client is
disabled.
Use the cancel or exit command to leave NFS Client configuration mode and enter
Global configuration mode.
Use the no nfs-client command to disable the NFS client.
Related Commands
cancel, exit
nfs-dynamic-mounts
Enters NFS Dynamic Mounts configuration mode.
Syntax
nfs-dynamic-mounts
no nfs-dynamic-mounts
Guidelines
While in NFS Dynamic Mounts configuration mode, you configure NFS dynamic
mounts settings, which are employed within the current application domain. By
default, the NFS dynamic mounts are disabled; once in NFS Dynamic Mounts
configuration mode, use the admin-state command to enable dynamic mounts and
other commands to specify operational properties.
Use the cancel or exit command to leave NFS Dynamic Mounts configuration
mode and enter Global configuration mode.
Use the no nfs-dynamic-mounts command to restore the NFS dynamic mount
default settings.
74
Command Reference
Advertisement
Table of Contents
