Table of Contents
Advertisement
Chapter 112. XSL Proxy Service configuration mode
This chapter provides an alphabetic listing of commands that are available in XSL
Proxy Service configuration mode. To enter this configuration mode, use the Global
xslproxy command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are available in XSL Proxy Service configuration mode.
acl
Assigns an Access Control List (ACL).
Syntax
acl name
no acl
Parameters
name
Guidelines
The acl command assigns an ACL to an XSL Proxy. An ACL restricts access to the
current XSL Proxy to those IP addresses that are specified by the ACL.
Use the no acl command to remove the ACL assignment from the XSL Proxy.
Related Commands
acl (Global), allow, deny
Examples
v Assigns the ACL-2 ACL to the current XSL Proxy.
v Removes the ACL.
default-param-namespace
Specifies the default namespace for parameters made available via the command
line or WebGUI.
Syntax
default-param-namespace namespace
© Copyright IBM Corp. 1999, 2008
is the name of the ACL assigned to the current XSL Proxy.
# acl ACL-2
#
# no acl
#
933
Advertisement
Table of Contents
