v Set the authentication method to local.
au-server-host
Specifies the IP address or domain name of a remote authentication server.
Syntax
au-server-host host
Parameters
host
Guidelines
The au-server-host command specifies the IP address or domain name of the
authentication server. When the authentication method is ldap, as defined with the
au-method command, you need to define the LDAP server in one of the following
ways:
v The au-server-host and au-server-port commands
v The loadbalancer-group command
Related Commands
au-method, au-server-port, loadbalancer-group
Examples
v Identifies LDAP authentication with optional retrieval of the group DN.
au-server-port
Specifies the port on the remote authentication server.
Syntax
au-server-port port
Parameters
port
# au-ldap-search on
# au-ldap-bind-dn proxyuser
# au-ldap-bind-password p@Ssw0rd
#
# au-method local
#
Specifies the IP address or domain name of the server.
# au-method ldap
# au-server-host ldap-1
# au-server-port 389
# au-ldap-search on
# au-ldap-bind-dn proxyuser
# au-ldap-bind-password p@Ssw0rd
#
Specifies the port number of the authentication server.
Chapter 64. RBM Settings configuration mode
589