Chapter 111. Xsl Coprocessor Service Configuration Mode; Cache-Relative-Url; Connection-Timeout; Crypto-Extensions - IBM WebSphere XS40 Command Reference Manual

Chapter 111. XSL Coprocessor Service configuration mode

This chapter provides an alphabetic listing of commands that are available in XSL
Coprocessor Service configuration mode. To enter this configuration mode, use the
Global xslcoproc command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in XSL Coprocessor Service
configuration mode.

cache-relative-url

Enables or disables the caching of relative client URLs in the document cache.
Syntax
cache-relative-url {on | off}
Parameters
on
off
Guidelines

connection-timeout

Specifies the amount of time that the XSL Coprocessor maintains an idle
connection.
Syntax
connection-timeout seconds
Parameters
seconds

crypto-extensions

Controls XSL Coprocessor access to cryptographic extensions.
Syntax
crypto-extensions {on | off}
Parameters
on
© Copyright IBM Corp. 1999, 2008
Enables caching of relative client URLs.
(Default) Disable caching of relative client URLs. Alternatively, use the no
cache-relative-url command.
Specifies the number of seconds the XSL Coprocessor maintains an idle
connection. Use a value in the range of 3 through 7200. The default is 60.
(Default) Enables access to cryptographic extensions.
927