Table of Contents
Advertisement
wsdl-message-direction-or-name
Specifies the WSDL-defined service traffic to validate with the current validate
action.
Syntax
wsdl-message-direction-or-name name
Parameters
name
Guidelines
The wsdl-message-direction-or-name command specifies the name or direction of
the WSDL input, output, or fault that defines the service traffic to validate. Use one
of the following values:
v The name of one or more WSDL input, output, or fault components.
v "#input" for the request direction.
v "#output" for the response direction.
v "*" for all inputs, outputs, and faults in the WSDL file.
If specified and not "*", only messages that are defined for inputs, outputs, and
faults that match the specified name or direction are considered valid. Faults are
considered valid for the response direction.
The command is meaningful only when the action type that is specified by the
type command is validate.
Related Commands
type
wsdl-operation
Specifies the name of the WSDL operation for the current validate action.
Syntax
wsdl-operation name
Parameters
name
Guidelines
The wsdl-operation command specifies the name of the WSDL operation that
defines the service traffic to validate. The value should be the unqualified name of
the WSDL operation or "*" for all operations that are defined in the WSDL file.
If specified and not "*", only messages that are defined for WSDL operations that
match the specified name are considered valid.
The command is meaningful only when the action type that is specified by the
type command is validate.
548
Command Reference
Specifies the name or direction of the service traffic.
Specifies the name of the WSDL operation.
Advertisement
Table of Contents
