Chapter 67. SLM Action configuration mode
This chapter provides an alphabetic listing of commands that are available in SLM
Action configuration mode. SLM is the abbreviation for Service Level Monitor.
To enter this configuration mode, use the Global slm-action command.
Many of the commands that are listed in "Common commands" on page 2 and
most, but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in SLM Action configuration mode.
log-priority
Specifies the log priority of the message that is generated when the current SLM
Action is triggered.
Syntax
log-priority priority
no log-priority
Parameters
priority
Guidelines
Use the no log-priority command to restore the default debug setting.
Examples
v Creates the minorPenalty SLM Action. Sets the priority to informational.
v Restores the default priority.
type
Specifies the administrative procedure followed when the current SLM Action is
triggered.
© Copyright IBM Corp. 1999, 2008
Specifies the message level. Use one of the following keywords:
v emergency
v alert
v critical
v error
v warning
v notice
v info
v debug (Default)
# slm-action minorPenalty
SLM Action configuration mode
# log-priority info
# no log-priority
#
617