Table of Contents
Advertisement
Guidelines
The ignored-requirements command defines which profile requirements to exclude
from validation.
For each requirement to exclude, use the ignored-requirements command. To
remove an excluded requirement, use the no ignored-requirements command.
For information about the requirements defined in the supported profiles, refer to
the following Web sites:
WS-I Attachments Profile, version 1.0
WS-I Basic Profile, version 1.0
WS-I Basic Profile, version 1.1
WS-I Basic Security Profile, version 1.0
Examples
v Excludes requirements R4221 and R4222 in the WS-I Basic Security Profile,
v Removes the excluded requirement BSP1.0:R4221 so that it is part of
profiles
Defines the profiles against which to validate conformance.
Syntax
profiles profile[+profile...]
Parameters
profile
http://www.ws-i.org/Profiles/AttachmentsProfile-1.0.html
http://www.ws-i.org/Profiles/BasicProfile-1.0.html
http://www.ws-i.org/Profiles/BasicProfile-1.1.html
http://www.ws-i.org/Profiles/BasicSecurityProfile-1.0.html
version 1.0, from validation.
# ignored-requirements BSP1.0:R4221
# ignored-requirements BSP1.0:R4221
#
conformance validation.
# no ignored-requirements BSP1.0:R4221
#
Specifies a literal for a Web Services Interoperability (WS-I) profile. To
specify multiple profiles, use a plus sign (+) between each profile. Use a
combination of the following literal representation for profiles:
Includes WS-I Attachment Profile, version 1.0.
AP10
Includes WS-I Basic Profile, version 1.0.
BP10
Includes WS-I Basic Profile, version 1.1.
BP11
Includes WS-I Basic Security Profile, version 1.0.
BSP10
The default is AP10+BP11+BSP10.
Chapter 9. Conformance Policy configuration mode
199
Advertisement
Table of Contents
