Table of Contents
Advertisement
Guidelines
The response-reject-level command identifies the degree of nonconformance that
causes a response message to be rejected. When a response message is rejected,
you can use the response-reject-include-summary command to include a summary
of the conformance analysis in the rejection message.
Examples
v Includes a summary in rejection messages that indicate conformance failures for
response-report-level
Identifies when to record a conformance report for responses.
Syntax
response-report-level {always | failure | never | warning}
Parameters
always
failure
never (Default) Never records a conformance report.
warning
Guidelines
The response-report-level command determines when to send a conformance
report for responses. To send a conformance report for responses, you must use the
response-report-target command to define where to send the report.
Related Commands
response-report-target
Examples
v Sends conformance reports for conformance failures for responses to
response-report-target
Specifies where to send conformance reports for responses.
Syntax
response-report-target URL
204
Command Reference
responses.
# response-reject-level failure
# response-reject-include-summary on
#
Always records a conformance report.
Records a conformance report for conformance failures.
Records a conformance report for both conformance failures and
conformance warnings.
datapower.com/conform/responses with the HTTP protocol.
# response-report-level failures
# response-report-target http://datapower.com/conform/responses
Advertisement
Table of Contents
