Table of Contents
Advertisement
off
default-param-namespace
Specifies the default namespace for stylesheet parameters.
Syntax
default-param-namespace namespace
Parameters
namespace
intermediate-result-timeout
Specifies the time that the XSL Coprocessor retains an unused intermediate-result
node set.
Syntax
intermediate-result-timeout seconds
Parameters
seconds
ip-address
Specifies the local IP address to monitor for incoming traffic.
Syntax
ip-address {address | 0}
Parameters
address Specifies the IP address (primary or secondary) of a DataPower Ethernet
0
Guidelines
In conjunction with the port command, identifies the IP addresses and ports that
the XSL Coprocessor service monitors.
Related Commands
port
928
Command Reference
Disable access to cryptographic extensions. Alternatively, use the no
crypto-extensions command.
Specifies the name of the default namespace. The default namespace for
parameters is:
http://www.datapower.com/param/config
Specifies the number of seconds that an XSL Coprocessor retains an
unused intermediate-result node set). Use an integer in the range of 1
through 600. The default is 20.
interface.
Indicates all DataPower Ethernet interfaces.
Advertisement
Table of Contents
