Table of Contents
Advertisement
Chapter 92. Web Application Firewall configuration mode
This chapter provides an alphabetical listing of commands that are available in
Web Application Firewall configuration mode.
To enter this configuration mode, use the Global web-application-firewall
command. The Global command creates the Web Application Firewall if the
Firewall does not exist. While in this mode, define the parameters for the Web
Application Firewall object.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in Web Application Firewall
configuration mode.
back-persistent-timeout
Sets the inter-transaction timeout value for firewall-to-server connections.
Syntax
back-persistent-timeout time
Parameters
time
Guidelines
Sets the inter-transaction timeout value, the maximum idle time allowed between
the completion of a TCP transaction and the initiation of a new TCP transaction on
the firewall-to-server connection. If the specified idle timeout is exceeded, the
connection is torn down.
An idle TCP connection can remain in the idle state for as long as 20 seconds after
the expiration of the inter-transaction timer.
Related Commands
back-timeout, front-persistent-timeout, front-timeout, persistent-connections
back-timeout
Sets the intra-transaction timeout value for firewall-to-server connections.
Syntax
back-timeout time
© Copyright IBM Corp. 1999, 2008
Specifies the maximum inter-transaction idle time. Use an integer in the
range of 0 to 7200. The default is 180.
A value of 0 disables persistent connections.
743
Advertisement
Table of Contents
