Iscsi-Hba (Type 9235); Iscsi-Target (Type 9235); Iscsi-Volume (Type 9235) - IBM WebSphere XS40 Command Reference Manual

iscsi-hba (Type 9235)

Enters iSCSI HBA configuration mode.
Syntax
iscsi-hba {iscsi1 | iscsi2}
Parameters
iscsi1
iscsi2
Guidelines
The iscsi-hba command enters iSCSI HBA configuration mode for the specified
HBA. Each DataPower appliance has iscsi1 and iscsi2. You cannot rename or
delete either HBA.
Related Commands
cancel, exit

iscsi-target (Type 9235)

Enters iSCSI Target configuration mode.
Syntax
iscsi-target name
no iscsi-target name
Parameters
name
Guidelines
The iscsi-target command enters iSCSI Target configuration mode. While in this
configuration, define the a logical storage volume, or file system, for remote
storage.
Use the no iscsi-target command to remove an iSCSI target.
Related Commands
cancel, exit

iscsi-volume (Type 9235)

Enters iSCSI Volume configuration mode.
56
Command Reference
Identifies the existing iSCSI HBA for the eth1 Ethernet interface.
Identifies the existing iSCSI HBA for the eth2 Ethernet interface.
Specifies the name of the iSCSI target.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.