Table of Contents
Advertisement
Chapter 5. Application Domain configuration mode
This chapter provides an alphabetic listing of commands that are available in
Application Domain configuration mode.
To enter this configuration mode, use the Global domain command. The Global
command creates the specified application domain if it does not exist. While in this
mode, define properties for the application domain.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in this configuration mode.
config-mode
Specifies the Application Domain configuration mode.
Syntax
config-mode [local] [import]
Parameters
local
import
Guidelines
If config-mode is set to import, you must specify both the location and type of the
remote configuration resource with the import-url and import-format commands.
Also if config-mode is set to import, you can specify a deployment policy to
preprocess the package with the deployment-policy command.
Related Commands
deployment-policy, import-format, import-url
Examples
v Creates the Randall application domain. Identifies a remote configuration
deployment-policy
Specifies the deployment policy that preprocesses the configuration package.
© Copyright IBM Corp. 1999, 2008
(Default) Specifies local, file-based configuration. Domain configuration is
defined in a local configuration file.
Specifies remote configuration. Domain configuration is defined in a
remote resource.
resource at the specified URL.
# domain Randall
New Application Domain configuration
# config-mode import
# import-url
http://www.datapower.com/configs/AppDomainTest.cfg
# import-format xml
#
173
Advertisement
Table of Contents
