Parameters
handler
Guidelines
Use the no source-raw command to delete a Stateless Raw XML Handler object.
Related Commands
cancel, exit
source-stateful-tcp
Enters Stateful Raw XML Handler configuration mode.
Syntax
source-stateful-tcp handler
no source-stateful-tcp handler
Parameters
handler
Guidelines
Use the no source-stateful-tcp command to delete a Stateful Raw XML Handler
object.
Related Commands
cancel, exit
ssh
Enables SSH on appliance interfaces.
Syntax
ssh
ssh address port
no ssh [address]
Parameters
address Specifies the IP address of a local interface.
port
102
Command Reference
Specifies the name of the Stateless Raw XML Handler object.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Specifies the name of the Stateful Raw XML Handler.
The name can contain a maximum of 128 characters. For restrictions, refer
to "Object name conventions" on page xxiv.
Identifies the port of a local interface that services SSH traffic. Use an
integer in the range of 0 through 65535.