Table of Contents
Advertisement
Related Commands
show firmware-version
show firmware-version
Displays the current firmware version, without image type and installation date.
Syntax
show firmware-version
Guidelines
The show firmware-version command provides information about the current
firmware version. This command provides the same details as the show version
command, but it does not provide the versions of the licenses that are available
with the show library-version command.
The show firmware-version command does not include information about whether
the current firmware image is the primary or secondary installation image or the
date on which the image was installed. For these details, use the show firmware
command.
Related Commands
show firmware, show library-version, show version
show http
Displays HTTP configuration details for a specified DataPower service, or displays
transaction counts and times for all DataPower services.
Syntax
show http [name]
Parameters
name
Guidelines
In the absence of an argument, displays transaction counts and times for all XML
Firewall and XSL Proxy services.
Related Commands
http, inject, suppress, version
show interface
Displays transaction details for all Ethernet interfaces.
Syntax
show interface
Specifies the name of an existing XML Firewall or XSL Proxy.
Chapter 114. Monitoring commands
955
Advertisement
Table of Contents
