Table of Contents
Advertisement
Chapter 20. Flash configuration mode
This chapter provides an alphabetic listing of commands that are available in Flash
configuration mode. To enter this configuration mode, use the Global flash
command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in Flash configuration mode.
boot config
Designates the startup configuration to use for the next restart.
Syntax
boot config filename
Parameters
filename
Guidelines
The boot config and boot image commands work in conjunction to define the
restart process, with boot config designating the startup configuration and boot
image designating the appliance startup firmware image.
Note: You can also use the Global write memory command in conjunction with
Related Commands
boot image, boot update, save-config, overwrite, shutdown, write memory
Examples
v Designates testEnvironment.cfg as the startup configuration.
boot delete
Deletes the secondary install.
Syntax
boot delete
© Copyright IBM Corp. 1999, 2008
Specifies the name of the startup configuration file.
the Global save-config overwrite command to save the appliance running
configuration to memory, and designate that saved file (autoconfig.cfg) as
the startup configuration.
# boot config testEnvironment.cfg
#
277
Advertisement
Table of Contents
