Table of Contents
Advertisement
Syntax
password-aaa-policy name
Parameters
name
Guidelines
The password-aaa-policy command assigns the AAA policy to perform
authentication of user names and passwords provided to the FTP server by the
client with the USER and PASS commands.
v If authentication succeeds, the FTP client can use all of the features of the FTP
v If authentication fails, a 530 error is returned. The user can attempt to
Without an AAA password policy, any user name and password is accepted but
evaluation does not occur until there is a data transfer operation. Therefore, until a
full AAA policy succeeds, an FTP client cannot perform any of the following FTP
operations:
v Read files with the RETR command
v Write files with the STOU command
v Delete files with the DELE command
v Take a directory with the NLST command or with the LIST command.
port
Specifies the listening port.
Syntax
port port
Parameters
port
Guidelines
The port command specifies the port that is monitored by the FTP service. This
port is the port on which FTP control connections can be established. This port
does not control the TCP port that is used for the data connections. If the FTP
client uses the FTP PASV command, data connections will use an arbitrary, unused
TCP port.
require-tls
Controls whether FTP control connections require TLS encryption.
Syntax
require-tls {on | off}
308
Command Reference
Specifies the name of an existing AAA Policy object.
server.
authenticate again.
Specifies the TCP listening port for the service. The default is 21.
Advertisement
Table of Contents
