Table of Contents
Advertisement
off
Guidelines
The status-log command controls the collection of throttle log messages. These
messages pertain to available memory, available temporary file space, and available
namespace QCodes. The criticality of these messages is set by the value of the
status-loglevel command.
Related Commands
status-loglevel
status-loglevel
Sets the criticality of throttle messages.
Syntax
status-loglevel priority
Parameters
priority
Guidelines
The status-loglevel command sets the criticality of throttle messages. This
command is meaningful only if the status-log command is set to on.
Related Commands
status-log
temp-fs-terminate
Specifies the temporary file space kill-threshold.
Syntax
temp-fs-terminate percent
Parameters
percent Specifies the minimum percentage of free temporary file space. Use an
Disables throttle settings log messages.
Specifies the message priority. Use one of the following keywords or
integers:
v emerg or 0
v alert or 1
v critic or 2
v error or 3
v warn or 4
v notice or 5
v info or 6
v debug or 7 (Default)
integer in the range of 0 through 100. The default is 2.
Chapter 80. Throttle Settings configuration mode
675
Advertisement
Table of Contents
