Chapter 37. Kerberos KDC Server configuration mode
This chapter provides an alphabetic listing of commands that are available in
Kerberos KDC Server configuration mode.
To enter this configuration mode, use the Global kerberos-kdc command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in Kerberos KDC Server configuration
mode.
port
Specifies the UDP or TCP port that the target Kerberos KDC server monitors.
Syntax
port port
Parameters
port
Related Commands
server, tcp
Examples
v Specifies port 8888 as the monitored port.
realm
Specifies the realm (administrative domain) to support.
Syntax
realm name
Parameters
name
Guidelines
You must specify a Kerberos realm to complete KDC configuration.
Related Commands
server
© Copyright IBM Corp. 1999, 2008
Identifies the listening port on the Kerberos server. The default is 88.
# port 8888
#
Specifies the name of the Kerberos realm.
373