Syntax
show sensors-temperature
Guidelines
The show sensors-temperature command provides values for sensors that read
temperatures. These sensors provide the temperature of the air flowing through the
system and of key components in the system.
show sensors-voltage
Displays the values for sensors that read voltage.
Syntax
show sensors-voltage
Guidelines
The show sensors-voltage command provides values for sensors that read
voltages. These sensors provide the voltage of the power supplies and for other
parts of the system.
show services
Displays a list of all active services.
Syntax
show services
Guidelines
Use the show services command to display a concise list of all active services.
The local IP field of the list contains the IP address and port (in the form
address:port) where the service is active. An IP address of 0.0.0.0 indicates that the
service is active on all interfaces.
Related Commands
cli telnet, httpserv, tcpproxy, xmlfirewall, xslcoproc, xslproxy
show simple-rate-limiter
Displays a list of Simple Rate Limiter Policies.
Syntax
show simple-rate-limiter [name]
Parameters
name
Guidelines
Policy names are followed by the associated command or command sequence.
Specifies the name of an existing Policy.
Chapter 114. Monitoring commands
965