Table of Contents
Advertisement
Related Commands
front-attachment-format
Examples
v Specifies that attachments output to servers are DIME-encapsulated.
back-persistent-timeout
Sets the inter-transaction timeout between the completion of a TCP transaction and
the initiation of a new TCP one on the gateway-to-server connection.
Syntax
back-persistent-timeout timerValue
Parameters
timerValue
Guidelines
The back-persistent-timeout command sets the value of the inter-transaction
timeout. This value is the maximum idle time to allow between the completion of
a TCP transaction and the initiation of a new TCP transaction on the
gateway-to-server connection. If the specified idle timeout is exceeded, the
connection is torn down.
An idle TCP connection might remain in the idle state for as long as 20 seconds
after the expiration of the inter-transaction timer.
Related Commands
back-timeout, front-persistent-timeout, front-timeout, persistent-connections
back-timeout
Sets the intra-transaction timeout for the gateway-to-server connection.
Syntax
back-timeout timerValue
Parameters
timerValue
Guidelines
The back-timeout command sets the value for the intra-transaction timeout. This
value is the maximum idle time to allow within a transaction on the
gateway-to-server connection. This timer monitors the interval between sending
# back-attachment-format dime
#
Specifies the maximum inter-transaction idle time in seconds. The value
must be in the range of 0 to 7200. The default is 180. A value of 0 disables
persistent connections.
Specifies the maximum intra-transaction idle time in seconds. The value
must be in the range of 10 to 86400. The default is 120.
Chapter 49. Multi-Protocol Gateway configuration mode
437
Advertisement
Table of Contents
