Table of Contents
Advertisement
date start [end]
time start [end]
address address[/netmask]
Guidelines
The show audit-search command searches the audit log and displays events that
match the specified criteria. Use the -np parameter to indicate no pagination for
the output.
Examples
v Display events in the audit log for the joesmith account one screen at a time.
v Display events in the audit log from February 10, 2008 onward one screen at a
v Display events in the audit log from IP address 10.10.10.15 upward as one
v Display events in the audit log from the IP address in the range of 10.10.10.0
show chkpoints
Displays information about the available checkpoint configuration files.
Syntax
show chkpoints
Related Commands
remove chkpoint, save chkpoint
show clock
Displays the current date, time, and system uptime.
Syntax
show clock
Related Commands
date, show time, time
Displays events in the audit log from the specified start date to optional
end date. Without an end date, displays events to the most recent date.
Displays events in the audit log from the specified start time to the
optional end time. Without an end time, displays events until 23:59:59.
Displays events in the audit log for the specified IP address or, if using a
netmask, the IP address range.
# show audit-search user joesmith
#
time.
# show audit-search time 20080210
#
continuous list.
# show audit-search -np address 10.10.10.15
#
through 10.10.10.255 one screen at a time.
# show audit-search address 10.10.10.0/24
#
Chapter 114. Monitoring commands
951
Advertisement
Table of Contents
