Table of Contents
Advertisement
back-timeout
Sets the intra-transaction timeout value.
Syntax
back-timeout timerValue
Parameters
timerValue
Related Commands
back-persistent-timeout, front-timeout, front-persistent-timeout,
persistent-connections
Guidelines
The back-timeout command sets the intra-transaction timeout value, the
proxy-specific maximum idle time allowed within a transaction on the Web
Services proxy-to-server connection. This timer, for example, monitors the interval
between sending the client request and receiving the server response, and idle time
within the data transfer process. If the specified idle time is exceeded, the
connection is torn down
backend-url
Specifies the URL to which all traffic to the static backend server is routed.
Syntax
backend-url url
Parameters
url
Guidelines
HTTP and HTTPS
Related Commands
propagate-uri, type
786
Command Reference
Specifies the maximum intra-transaction idle time in seconds. Use an
integer in the range of 10 to 86400. The default is 120.
Specifies a URL that fully identifies where all traffic is routed by default.
This property can take one of the following general forms:
v http://host:port/URI
v https://host:port/URI
To use a load balancer, specify the name of an existing Load Balancer
Group instead of the address-port pair in the URL.
The service uses the HTTP or HTTPS protocol to connect the host at the
specified port. The URL includes the URI. The URL or URI might be
rewritten by other configuration options. With HTTPS, the configured SSL
Proxy handles the SSL security negotiation.
Advertisement
Table of Contents
