Chapter 36. Iscsi Volume Configuration Mode (Type 9235); Directory; Lun - IBM WebSphere XS40 Command Reference Manual

Chapter 36. iSCSI Volume configuration mode (Type 9235)

This chapter provides an alphabetic listing of commands that are available in iSCSI
Volume configuration mode. To enter this configuration mode, use the Global
iscsi-volume command.
All of the commands that are listed in "Common commands" on page 2 and most,
but not all, of the commands that are listed in Chapter 114, "Monitoring
commands," on page 949 are also available in iSCSI Volume configuration mode.

directory

Specifies the name of the directory.
Syntax
directory name
Parameters
name
Guidelines
The directory command specifies the name of the directory under which to make
the files on the iSCSI volume available in the local: and logstore: directories in each
application domain.
Examples
v Makes the files on the VOL1 iSCSI volume accessible in the local: and logstore:

lun

Specifies the logical unit number.
Syntax
lun LUN
Parameters
LUN
Guidelines
The lun command specifies the logical unit number (LUN). Use an integer in the
range of 0 through 255.
© Copyright IBM Corp. 1999, 2008
Specifies the name of the subdirectory.
directories, under the StoreDisk-1 subdirectory.
# iscsi-volume VOL1
NEW iSCSI Volume configuration mode
# directory StoreDisk-1
#
Specifies the logical unit number.
371