log-priority
Enables the generation of a log entry when a control procedure is triggered.
Syntax
log-priority priority
Parameters
priority
Guidelines
This command is required when the type command is set to notify; otherwise, it is
optional.
Related Commands
block-interval, type
Examples
v Enters Message Filter Action configuration mode to create the PaperTrail control
v Defines the PaperTrail control procedure as being of the notify type. Log a
type
Specifies the behavior of a control procedure when a monitored message class
exceeds a configured threshold value.
Syntax
type {block | notify | reject}
Parameters
block Temporarily denies service to a message class and optionally adds a log
422
Command Reference
Identifies the event priority. The priority indicates that all events that are
greater than or equal to this value are logged. Events use the following
priority in descending order:
v emerg (Emergency)
v alert (Alert)
v critic (Critical)
v error (Error)
v warn (Warning)
v notice (Notice)
v info (Information)
v debug (Debug)
procedure.
# monitor-action PaperTrail
Message filter action Configuration mode
#
warning and take no further action.
# type notify
# log-priority warning
#
entry, when a message class exceeds a configured threshold.