Stream-Output-To-Front; Uri-Normalization - IBM WebSphere XS40 Command Reference Manual

Datapower xml security gateway
Table of Contents

Advertisement

Parameters
buffer-until-verification
stream-until-infraction
Related Commands

stream-output-to-front

stream-output-to-front
Determines whether to begin sending output to the client before all processing is
complete.
Syntax
stream-output-to-back {buffer-until-verification | stream-until-infraction}
Parameters
buffer-until-verification
stream-until-infraction
Related Commands
stream-output-to-back

uri-normalization

Controls the normalization of URIs before processing.
Syntax
uri-normalization {on | off}
Parameters
on
(Default) Causes the Web Application Firewall to buffer submitted
messages until all processing is verified complete. After verification,
forwards messages to the appropriate backend URL.
Causes the Web Application Firewall to begin sending the message to the
backend URL before all processing is complete, potentially increasing the
speed. If an infraction is encountered, the firewall reverts to buffered
behavior. If the XML Manager that is selected for this firewall has
streaming enabled, select stream-until-infraction to be certain that the
firewall streams messages end-to-end.
(Default) Causes the Web Application Firewall to buffer submitted
messages until all processing is verified complete. After verification,
returns messages to the client.
Causes the Web Application Firewall to begin sending the message to the
client before all processing is complete, potentially increasing the speed. If
an infraction is encountered, the firewall reverts to buffered behavior. If the
XML Manager that is selected for this firewall has streaming enabled, select
stream-until-infraction to be certain that the firewall streams messages
end-to-end.
(Default) Enables URI normalization.
Chapter 92. Web Application Firewall configuration mode
751

Advertisement

Table of Contents
loading

Table of Contents